KIMBERLY WINGED UPHOLSTERED BED FRAME WITH BUTTON TUFTED HEADBOARD

The Kimberly Winged Upholstered Bed Frame with Button Tufted Headboard is a bed built around a combination that most upholstered frames offer as two separate choices. Winged headboards have presence  the wide, upholstered panels that extend outward on both sides frame the head of the bed, enclose the sleeping space, and give the room an immediate focal point. Button tufted headboards have depth  the pattern of compressed diamonds across the full face, each one casting its own small shadow, creates a surface that catches light, holds attention, and looks genuinely hand-crafted. The Kimberly has both.

The combination works because each detail amplifies the other. The wings give the tufting more surface area  the diamond pattern runs not just across the central headboard panel but continues into the angled wing faces, so the three-dimensional quality of the tufting is visible from multiple angles and catches the light differently across the whole structure. The tufting, in turn, gives the wings a richness and texture that flat upholstered wings cannot match. Where a plain-fabric winged headboard looks bold and graphic, a tufted winged headboard looks opulent and considered.

The Kimberly is available in over 25 fabric and colour options across Plush Velvet, Naples, Boucle, Linoso, and Marble. The tufting works best in Plush Velvet  the dense pile compresses around each button in a way that creates genuine shadow depth in the diamond recesses and genuine brightness on the raised fold edges. In Boucle or Naples, the tufting reads more as a textural surface treatment than a high-contrast pattern  still beautiful, but in a different register. The wings are upholstered in the same fabric as the tufted central panel, giving the Kimberly complete consistency across its full surface.

The frame is built from solid timber and engineered hardwood throughout. Both the wing structures and the tufted central panel are built over solid timber frames  the wings hold their angle correctly over time, and the tufting stays under correct tension so the diamonds remain well-defined rather than flattening. Under-bed drawer storage is available at checkout. Every Kimberly comes with a 100-day free trial and a 5-year warranty covering the frame, headboard, wing structures, and tufting construction.

PRODUCT OPTIONS

Size & Pricing

Note: the wings extend slightly beyond the width of the base on each side  allow clearance when positioning. The tufted diamond pattern also scales with the headboard  wider sizes give more columns and a richer, more complete pattern. All sizes compatible with standard UK mattresses. Mattress sold separately.

Fabric & Colour Options

Plush Velvet is the recommended choice for the Kimberly  the tufting requires a fabric with sufficient pile depth to create genuine shadow contrast in the diamond recesses. Deep velvet tones (Steel, Navy, Black, Mocca) give the tufted wings their most dramatic expression. Fabric samples available on request.

Storage / Drawer Options

Drawers sit flush within the base with no visible fixings  nothing to interrupt the upholstered finish beneath the tufted winged headboard.

Headboard Height Options

The 60 inch setting is the defining look for the Kimberly  the tufted diamond pattern needs height to display fully across the central panel and both wings, and the wings themselves have maximum presence at the taller settings. A 60 inch Kimberly in Plush Velvet at king or super king size is the most opulent bed in the Macba Beds range.

KEY FEATURES & BENEFITS

🔹 Winged Headboard with Full Button Tufting  Two Details in One

The Kimberly is the only bed in the Macba Beds range that combines a winged headboard with full button tufting across the complete headboard surface  central panel and both wings. Each detail enhances the other: the wings give the tufting more surface area and more angles from which to catch the light, while the tufting gives the wings a richness and depth that flat upholstery cannot achieve. Together they create a headboard that is more than the sum of its parts.

🔹 Tufting Across the Wings  Not Just the Centre

On most tufted winged beds, the tufting is confined to the central panel and the wings are plain upholstery. On the Kimberly, the button tufting continues across both wing faces  the diamond pattern runs the full width of the headboard including the angled wing surfaces. This means the tufting is visible from multiple angles, catches the light differently across each angled face, and gives the Kimberly a more complete, more opulent expression of the combined detail.

🔹 Wings That Frame the Tufted Centre

The wings of the Kimberly extend outward at an angle that draws the eye toward the tufted central panel. The visual dynamic is one of framing  the wings set the boundaries of the headboard and the tufted centre is what fills that frame with depth and detail. From across the room, the whole headboard reads as a single, considered composition rather than two separate features sitting next to each other.

🔹 Deep Button Tufting  Shadow, Light, Depth

The tufting on the Kimberly uses a deep specification  buttons stitched through velvet and foam layers to create well-defined diamond recesses and raised fold edges. In Plush Velvet the shadows between diamonds are pronounced and the light catches the raised pile along the fold edges, creating the rich three-dimensional quality that makes quality tufted velvet so recognisable. The tufting is maintained under correct tension by the solid timber headboard frame, so the diamonds stay well-defined through years of daily use.

🔹 Plush Velvet  The Right Fabric for Both Features

Plush Velvet is the fabric that does justice to both the wings and the tufting on the Kimberly. For the tufting, the dense pile is essential  it compresses around the buttons and swells between tucks in a way that creates genuine shadow depth and brightness at the fold edges. For the wings, the pile catches and reflects light differently across the angled face compared to a flat surface, adding to the three-dimensional quality of the overall headboard. No other fabric in the range performs as well across both features simultaneously.

🔹 25+ Fabric & Colour Combinations

Over 25 options across Plush Velvet, Naples, Boucle, Linoso, and Marble give the Kimberly genuine flexibility. For the most opulent expression of the combined features  Plush Velvet in Steel, Navy, Black, or Mocca. For a softer, more textural reading of the tufted wings  Boucle in Cream or Granite, where the loops catch the light across the diamond pattern in a warmer, more organic way. Fabric samples are available on request and are strongly recommended before ordering.

🔹 Wing Structures Built Over Solid Timber

The wings are not flat panels angled into position  they are built over solid timber frames shaped to the wing angle from the start. This means the wings hold their angle and upholstered finish correctly over years of use, with no sagging, splaying, or drift in the tufted surface tension across the wing faces.

🔹 Solid Timber & Hardwood Frame

The Kimberly is built from solid timber and engineered hardwood throughout. The solid construction supports both the wing structures and the tufted headboard panel under correct tension  holding the diamond pattern well-defined and the wing angles consistent through years of daily use. No flex, no creaking, no settling.

🔹 Solid Wood Slat Base Included

A full-width solid wood slat system is included as standard, providing even mattress support right across the frame. Compatible with all standard UK mattress types  pocket sprung, memory foam, and hybrid  and arrives ready to fit with no extra components needed.

🔹 Optional Under-Bed Drawer Storage

Add two or four drawers at checkout and choose which side they open from. Drawers sit flush within the base with no visible fixings  nothing to interrupt the Kimberly's opulent upholstered finish from the base upward.

🔹 Four Headboard Heights  Up to 60 Inches

Choose from 40, 48, 54, or 60 inches measured floor to the top of the headboard. The 60 inch setting is where the Kimberly delivers its most complete and impressive version  the tufted diamond pattern has maximum rows across both the central panel and the wings, and the wings themselves have maximum presence. This is the definitive configuration.

🔹 All Standard UK Sizes Available

The Kimberly is available from single through to super king, all cut to standard UK mattress dimensions. Note that the wings extend slightly beyond the base width  allow clearance on each side when placing the bed. Wider sizes give the tufted diamond pattern more columns and the wings more span.

🔹 100-Day Free Trial

Sleep on the Kimberly for up to 100 nights before making your final decision. If it is not right for you within that period, contact the Macba Beds team and they will take you through the next steps  no pressure, no rushing.

🔹 5-Year Warranty  Frame, Wings, Tufting

Every Kimberly Winged Upholstered Bed Frame with Button Tufted Headboard is backed by a 5-year warranty covering the frame, base, headboard, wing structures, and tufting construction against manufacturing defects. If the tufting loses tension, buttons come loose, or the wing structures develop a fault, Macba Beds will repair or replace it.

🔹 Free Tracked UK Delivery & Easy Assembly

Free tracked delivery is included on every order to mainland UK addresses  no minimum spend, no hidden charges. All fixings and an Allen key are in the box. The tufted winged headboard arrives pre-finished  tufting applied, wing angles set  and attaches to the base in a single step. Most customers complete the full build in under an hour.

PRODUCT SPECIFICATIONS

SIZE GUIDE & ROOM PLANNING

Important: the wings extend slightly beyond the base width on both sides. Allow at least 10–15cm of clearance on each side when positioning the Kimberly against a wall or beside bedside tables. All sizes accept standard UK mattresses. Mattress sold separately.

DELIVERY & ASSEMBLY

Delivery

Free tracked delivery is included on every order to mainland UK addresses  no minimum spend, no hidden charges. You will receive a tracking reference by email as soon as your order is dispatched. Deliveries to Scottish Highlands, Northern Ireland, and some remote postcodes may take a little longer. Get in touch with the Macba Beds team before ordering if you need to confirm timescales for your area.

Assembly

The Kimberly arrives flat-packed with every component clearly numbered. All fixings and an Allen key are included  nothing else is needed. The tufted winged headboard arrives pre-finished  the tufting is already applied across the central panel and both wing faces, and the wing angles are already set. The headboard attaches to the base frame in a single step. No on-site tufting or wing adjustment is required. If you have added drawers, those slot into the base without any extra fixings. Most customers complete the full build in under an hour. The Macba Beds team is available by phone or email if you need assistance at any point.

CARE & MAINTENANCE

Plush Velvet Upholstery  All Surfaces

Use a soft velvet brush or vacuum on a low setting for everyday cleaning, always moving in the direction of the pile. Clean the central headboard panel and each wing face separately, working with the pile direction on each surface  the pile direction may run differently on the angled wing faces compared to the central panel, so check before brushing. After cleaning, brush lightly in the pile direction to restore the lustre. For spills, blot immediately with a clean dry cloth  do not rub. For marks, use a specialist velvet fabric cleaner on a soft cloth working with the pile direction, then leave to air dry away from direct heat. Never steam clean velvet upholstery.

Tufting & Button Care

The tufted diamonds and buttons are secured during manufacture across both the central panel and the wing faces. Inspect all buttons periodically  if any feels loose at the stitching point, contact the Macba Beds team before attempting any DIY repair. Do not apply pressure into the diamond recesses when cleaning and do not pull on any button. Re-stitching a button incorrectly risks damaging both the velvet and the foam layers beneath it on any face of the headboard.

Wing Structure Care

Do not apply sideways pressure against the outer wing edges or use the wings as a handle when repositioning the bed. The wing angle is structural and any force applied against the wings from outside can stress the upholstery and the internal frame over time. Ensure the wing edges have at least 10–15cm clearance from any adjacent wall, furniture, or bedside table to prevent sustained contact with hard surfaces that can wear the upholstered edges.

Pile Direction Across Multiple Surfaces

Because the tufted headboard has three upholstered faces  the central panel and two angled wings  the direction of the velvet pile may run differently on each. After cleaning or over time, restore the pile direction on each face separately using a soft velvet brush. This keeps the shadow-and-light contrast of the tufted diamonds consistent across the full headboard rather than uneven between the centre and the wings.

Frame & Drawers

Check and tighten all fixings every few weeks, particularly during the first month. Pay attention to both the wing attachment points and the headboard-to-base connection  keeping these tight maintains the wing angle and the tufting tension. If drawer runners stiffen, a small amount of candle wax or dry lubricant along the track restores smooth operation.

Slat Base

Check slats periodically to ensure they are all seated correctly. Press any shifted slat back into place by hand. Even distribution gives consistent mattress support across the full frame.

FREQUENTLY ASKED QUESTIONS

Q: Why does the Kimberly combine wings and tufting  how do the two features work together?

A: Most beds with a statement headboard feature choose one: wings for structure and enclosure, or tufting for depth and texture. The Kimberly has both because the two features genuinely enhance each other rather than competing. The wings give the tufted diamond pattern more surface area  the tufting continues across both wing faces, so the three-dimensional quality of the diamonds is visible from multiple angles. The tufting, in turn, gives the wings a richness that plain upholstery cannot match  the shadow and light across the diamond recesses add a layer of visual depth that makes the wing surfaces far more interesting than a flat velvet panel. The result is a headboard that is more opulent than either feature could be alone.

Q: Does the tufting cover the wings as well as the central panel?

A: Yes  on the Kimberly, the button tufting runs across the full headboard surface including both wing faces. This is not the case on all tufted winged beds  some only tuft the central panel and leave the wings as plain upholstery. On the Kimberly the diamond pattern continues from the central panel onto each wing face, so the tufted detail is visible from straight on and from both sides.

Q: How does the Kimberly compare to the Alexandra Winged Bed Frame in the range?

A: Both are winged bed frames, but they are very different beds. The Alexandra has plain upholstered wings  elegant and refined, with a measured grace that suits rooms where a clean, composed look is the priority. The Kimberly has tufted wings  opulent and rich, with a maximalist quality that suits rooms built around luxury and layered detail. If you want elegance, the Alexandra. If you want opulence, the Kimberly. Both are available in the same fabric ranges and headboard heights.

Q: How does the Kimberly compare to the Luxury Velvet Tufted Bed Frame in the range?

A: The Luxury Velvet Tufted has a straight, flat-topped panel headboard  the entire focus is on the tufted surface and the richness of the velvet. The Kimberly adds the winged structure to that tufted surface  so the diamond pattern is present on a three-dimensional headboard shape rather than a flat panel. The Kimberly is more dramatic overall because the wings add structural presence alongside the tufted depth. The Luxury Velvet Tufted is the better choice if you want pure tufted texture without the wing detail. The Kimberly is the choice if you want both.

Q: Which fabric and colour works best on the Kimberly?

A: Plush Velvet in a deep tone is strongly recommended  Navy, Steel, Black, or Mocca. The tufting depends on a fabric with sufficient pile depth to create genuine shadow contrast in the diamond recesses, and Plush Velvet is the only fabric in the range that fully delivers this across the wing faces as well as the central panel. Deep tones maximise the contrast between the illuminated diamond ridges and the shadowed recesses, which is what gives the combined tufted wing effect its most opulent expression. Lighter velvet tones and other fabric ranges are available and create a softer, more textural result  all beautiful in their own way, but the darkest velvets deliver the Kimberly at its most impressive.

Q: How much room do the wings need on each side?

A: The wings extend slightly beyond the width of the mattress base on both sides. Allow at least 10–15cm of clearance between the outer edge of each wing and any adjacent wall, furniture, or bedside table. This prevents the upholstered tufted wing edges from making sustained contact with hard surfaces and protects the velvet at the outermost points over time. If your bedroom layout is tight, contact the Macba Beds team before ordering and they can confirm the exact wing dimensions for the size you are considering.

Q: How long does delivery take and is it actually free?

A: Yes  free tracked delivery is included on every order to mainland UK addresses. No minimum spend, no extra charges at checkout. You will receive a tracking link by email once your order has been dispatched. If you are in a remote area such as the Scottish Highlands or Northern Ireland, contact the Macba Beds team before ordering to confirm lead times for your postcode.

Q: Will this bed fit a standard UK mattress?

A: Yes. Every size of the Kimberly is made to standard UK mattress dimensions. The wings extend beyond the base width but the sleeping surface is entirely within standard dimensions. Allow clearance on each side for the wings when planning your room layout.

Q: How hard is it to put together and how long does it take?

A: Straightforward. Most customers complete the full build in under an hour. The tufted winged headboard arrives pre-finished with the tufting applied across all surfaces and the wing angles already set  no on-site work to either detail is required. All fixings and an Allen key are included. The headboard attaches to the base in a single step. If you have added drawers, they slot in as part of the same build. The Macba Beds team is on hand if you need help.

Q: Does the bed make noise or creak?

A: Not when assembled correctly. The solid timber and hardwood construction keeps the frame quiet under normal use. Make sure all fixings are fully tightened at both the headboard attachment points and the wing connection points during the build, and check again after the first couple of weeks.

Q: Can I get a fabric sample before I order?

A: Yes  fabric samples are available on request and are strongly recommended for the Kimberly. The tufting effect varies significantly between fabrics and colours, and the way velvet reads differently on the angled wing faces compared to the central panel can only be assessed properly with a sample in your room. Contact the Macba Beds team and they will send out samples for your shortlisted choices.

Q: What is the 100-day free trial?

A: Every Kimberly Winged Upholstered Bed Frame with Button Tufted Headboard comes with a 100-day free trial. That is over three months to sleep on it and live with the tufted winged velvet headboard in your room before making your final decision. If you are not satisfied within that period, contact the Macba Beds team and they will guide you through the next steps  no rush, no pressure.

Q: What does the 5-year warranty cover?

A: The Kimberly comes with a 5-year warranty covering the frame, base, headboard, wing structures, and tufting construction  including the button stitching on all headboard surfaces  against manufacturing defects. If the tufting loses tension, buttons come loose, or the wing structures develop a fault due to materials or workmanship, Macba Beds will repair or replace it. Contact the team with your order number if you need to make a claim.

Q: What is the returns policy?

A: You can return an unused, unassembled item in its original packaging within 14 days of delivery. Because the Kimberly is built to your chosen fabric and colour specification, made-to-order configurations may have different return conditions  the full policy is on the Macba Beds website. To start a return, contact the customer support team with your order number and they will take it from there.

Q: Does it come with a mattress?

A: No  the Kimberly is sold as a bed frame only. The solid wood slat base is compatible with all standard UK mattress types including pocket sprung, memory foam, and hybrid. For a tufted velvet bed of this quality, a high-quality pocket sprung or hybrid mattress is recommended. The Macba Beds team can advise if you are unsure.