Harriet Panels ottoman bed

The Harriet Panels Ottoman Bed is the bed for rooms where both the look and the function of the bed need to be right. The panelled headboard gives the Harriet its character: a structured, architectural face built from a series of upholstered panels set into the headboard surface, creating a depth and texture that a flat upholstered headboard does not have. The stacked panel design is clean enough to work in a minimalist room and detailed enough to give the bed genuine presence in a more fully dressed space. It sits flat against the wall without the lateral extension of a winged design, which makes it the right choice for bedrooms where wall space either side of the headboard is limited or where a more restrained, considered look is preferred over the dramatic statement of a winged frame.

The ottoman base beneath the Harriet's panelled headboard is where the bed earns the second half of its identity. A gas-lift mechanism raises the entire base top and mattress as a single unit, revealing a full-depth storage compartment that spans the complete internal footprint of the bed frame. There are no drawer runners, no dividers, and no frame elements reducing the usable interior space. The entire floor area of the bed is accessible storage at a depth suited to duvets, pillows, seasonal clothing, suitcases, and anything else the bedroom needs to contain but does not need to present. The gas-lift pistons counterbalance the combined weight of the base top and mattress so the lift is effortless and the base holds open independently while the storage is accessed.

Every surface of the Harriet is fully upholstered in your chosen fabric, from the panelled headboard face to the sides of the ottoman base, with no raw surfaces, no exposed fixings, and no unfinished edges anywhere on the exterior. The panel detail on the headboard is upholstered in the same fabric as the rest of the bed: the panels are defined by the fabric itself rather than by contrasting materials or decorative trims, which gives the Harriet a clean, unified quality that holds across all 25 fabric options. In Plush Velvet the panels catch the light and create areas of shadow and depth across the headboard face. In Boucle the textured surface of the fabric emphasises the geometry of the panels. In Linoso or Marble the panels read more quietly, giving the headboard a sophisticated, restrained quality.

The opening direction of the ottoman mechanism is specified at the point of order: end opening for rooms where the foot of the bed has the most clearance, and side opening for rooms where the bed sits with its foot against a wall or in an alcove. The interior of the ottoman base is cleanly lined throughout with no raw timber or unfinished surfaces. Everything stored inside is protected from dust and from contact with any unfinished material. The Harriet is compatible with all standard UK mattress types and is available in every standard UK size from double through to super king.

PRODUCT OPTIONS

Available Sizes:

Available Fabrics:

Opening Direction:

Mattress sold separately. All sizes compatible with standard UK mattresses including pocket sprung, memory foam, and hybrid. Specify opening direction and fabric at the point of order.

KEY FEATURES & BENEFITS

🔹 Panelled Headboard Design

The Harriet's headboard is defined by its stacked panel face: a series of upholstered panels set into the headboard surface that create architectural depth and texture across the headboard without adding lateral spread. The panels are formed and upholstered in the same fabric as the rest of the bed, giving the Harriet a unified, crafted quality. In Plush Velvet the panels catch the light and create shadow play across the headboard face. In Boucle and Naples the texture of the fabric emphasises the geometry. The panel design gives the Harriet its own clear character within the Macba Beds range.

🔹 Gas-Lift Ottoman Storage

The ottoman mechanism lifts the entire base top and mattress as a single unit, revealing a full-depth storage compartment that spans the complete internal footprint of the bed frame. No drawers, no dividers, no frame elements reducing usable space. The gas pistons counterbalance the combined weight so the lift is effortless and the base holds open independently while the storage is accessed. The most efficient use of the floor space a bed already occupies.

🔹 End Opening & Side Opening Available

The Harriet is available in end-opening and side-opening configurations. End opening lifts from the foot of the bed and requires clear floor space at the foot end. Side opening lifts from one side and suits rooms where the foot of the bed is against a wall or where side access is more convenient. Specify your preferred opening direction at the point of order.

🔹 Cleanly Lined Interior

The interior of the Harriet's ottoman base is cleanly lined throughout with no raw timber surfaces, no exposed frame elements, and no unfinished areas at the edges or corners. Everything stored inside is protected from dust and from contact with any unfinished surface. The storage compartment looks as considered on the inside as the Harriet looks on the outside.

🔹 Fully Upholstered Throughout

Every exterior surface of the Harriet is fully upholstered in your chosen fabric: the panelled headboard face, the headboard sides and back, and all four sides of the ottoman base. No raw surfaces, no exposed fixings, no unfinished panels visible from any angle. The gas-lift mechanism and all structural components are completely internal.

🔹 Over 25 Fabric & Colour Options

The Harriet is available in over 25 colours and textures across Plush Velvet, Naples, Boucle, Linoso, and Marble. The headboard and base are upholstered in the same fabric throughout. The panel detail interacts differently with each fabric: Plush Velvet gives drama, Boucle gives warmth, Linoso gives refinement. Fabric samples available on request.

🔹 Solid Timber & Engineered Hardwood Frame

The Harriet is built on a solid timber and engineered hardwood frame. The construction holds the panelled headboard, the ottoman base, and the gas-lift mechanism in correct alignment without flex, movement, or any sound from the frame during use or when operating the ottoman lift.

🔹 Slat Base Included

A solid wood slat base is included as standard with every Harriet. The slats support the mattress evenly across the full base surface and are compatible with all standard UK mattress types: pocket sprung, memory foam, and hybrid. No additional components are required.

🔹 All Standard UK Sizes

Available in double, king size, and super king. All sizes cut to standard UK mattress dimensions and compatible with the full Macba Beds mattress range.

🔹 100-Day Free Trial

Every Harriet Panels Ottoman Bed comes with a 100-day free trial from the date of delivery. Over three months to sleep on it and live with it in your room before making your final decision. If it is not right, contact the Macba Beds team within that period and they will guide you through the next steps.

🔹 5-Year Warranty

Every Harriet is backed by a 5-year warranty covering the frame, headboard, and gas-lift mechanism against manufacturing defects. If anything is not right due to a fault in materials or workmanship, Macba Beds will repair or replace it.

🔹 Free Tracked UK Delivery

Free tracked delivery is included on every order to mainland UK addresses. No minimum spend, no hidden charges at checkout. You will receive a tracking reference by email as soon as your order is dispatched.

PRODUCT SPECIFICATIONS

SIZE & STORAGE GUIDE

Storage depth is approximate and may vary slightly by size. Allow adequate floor clearance for the chosen opening direction. Mattress sold separately.

FABRIC GUIDE

The panelled headboard interacts distinctly with each fabric in the Macba Beds range. The panel detail creates areas of light and shadow across the headboard face that are amplified or softened depending on the fabric chosen:

Fabric samples are available on request across all ranges. Plush Velvet samples are particularly recommended before ordering: the colour reads differently in different light conditions and the pile direction affects the overall tone of the headboard surface.

OPENING DIRECTION GUIDE

End Opening

The gas lift raises the base top from the foot end of the bed. You stand at the foot and lift. The base top and mattress hinge upward toward the head of the bed and are held open independently by the gas pistons. End opening requires clear floor space at the foot of the bed for the full swing arc of the base top when open. End opening is the right choice when the foot of the bed has open floor space and when the sides of the bed are restricted by walls, fitted furniture, or bedside tables positioned close to the base.

Side Opening

The gas lift raises the base top from one side of the bed. You stand at the side and lift from the edge. The base top and mattress hinge upward toward the opposite side and are held open independently. Side opening requires clear floor space on the lifting side but no clearance at the foot of the bed. Side opening is the right choice when the bed is positioned with its foot against a wall, in an alcove, or when the room layout makes the side more naturally accessible than the foot end.

Specify your preferred opening direction at the point of order. If you are uncertain which direction suits your room layout, contact the Macba Beds team before ordering and they will advise based on your room dimensions and bed position.

DELIVERY & ASSEMBLY

Delivery

Free tracked delivery is included on every order to mainland UK addresses. No minimum spend, no hidden charges at checkout. You will receive a tracking reference by email as soon as your order is dispatched. Deliveries to the Scottish Highlands, Northern Ireland, and some remote postcodes may take a little longer. Contact the Macba Beds team before ordering if you need to confirm timescales for your area.

Assembly

The Harriet Panels Ottoman Bed arrives in clearly numbered components. The ottoman base sections and the panelled headboard frame assemble with the included fixings and Allen key. The gas-lift mechanism is pre-installed within the base and requires no on-site mechanical assembly. The headboard attaches directly to the ottoman base frame. All fixings are included and nothing additional is required. Most customers complete the full build in under ninety minutes. The Macba Beds team is available by phone or email if you need any assistance at any point during the build.

After Assembly

Once assembled, test the gas-lift mechanism before placing the mattress. Lift the base top from the specified opening end or side and confirm it raises smoothly and holds open independently in the fully open position. The mechanism should not require significant effort to lift and should not drop suddenly when released. If you experience any resistance or the base does not hold open correctly, contact the Macba Beds team before placing the mattress and proceeding with use.

CARE & MAINTENANCE

Upholstery

Use a soft upholstery brush or vacuum on a low setting for everyday cleaning of the headboard and base. For spills on the upholstered surfaces, blot immediately with a clean dry cloth without rubbing. For marks, spot clean with a lightly damp cloth and a small amount of mild fabric cleaner and leave to air dry away from direct heat. Do not use a steam cleaner on any fabric in the range. For Plush Velvet, run a soft brush over the pile in the direction of the nap after cleaning to restore the depth and lustre of the colour. The panel detail on the headboard can be cleaned in the same way as the flat upholstered surfaces: work carefully along the panel lines without saturating the fabric at the recessed edges.

Gas-Lift Mechanism

The gas-lift mechanism requires no routine maintenance. If the mechanism begins to feel heavier to lift over time, check that the base top is not obstructed and that no items stored in the ottoman are pressing against the underside of the base top. If the mechanism loses holding strength and does not keep the base open independently, contact the Macba Beds team: this is covered under the 5-year warranty.

Frame & Fixings

Check and tighten all fixings every few weeks during the first month of use and every few months thereafter. Pay particular attention to the headboard attachment points and the base section joins. The gas-lift mechanism generates movement forces at the hinge points of the base: ensuring these joins remain firmly tightened keeps the base structure in correct alignment during use.

FREQUENTLY ASKED QUESTIONS

Q: What does the panelled headboard look like?

A: The Harriet's headboard has a stacked panel face: a series of upholstered rectangular panels set into the headboard surface in a structured arrangement. The panels are defined by the fabric itself rather than by contrasting materials or trims, giving the headboard a clean, unified appearance. The result is a headboard with architectural depth and texture that reads as crafted and considered rather than plain or decorative. In Plush Velvet the panels create shadow play across the face. In Boucle and Naples the fabric texture adds a layer of warmth to the geometry. Fabric samples and product images will give the clearest picture of how the panel detail reads in your chosen fabric before ordering.

Q: How does the ottoman storage work?

A: A gas-lift mechanism is built into the ottoman base. Lifting from the specified opening end or side raises the entire base top and mattress as a single unit, hinging upward and holding open via gas pistons. The full interior of the base is then accessible as a single open storage compartment with no drawers, dividers, or frame elements reducing the usable space. To close, lower the base top gently and the gas pistons control the descent so it closes smoothly without dropping.

Q: How do I choose between end opening and side opening?

A: End opening lifts from the foot of the bed and needs clear floor space at the foot end. Side opening lifts from one side and needs clear floor space on that side, with no clearance needed at the foot. If your bed sits with the foot against a wall or in an alcove, side opening is the right choice. If the sides of the bed are restricted by walls or bedside furniture, end opening is better. Measure the available clearance on each side before specifying the direction. If you are unsure, the Macba Beds team can advise before you order.

Q: How much storage does the Harriet have?

A: The storage compartment runs the full internal length and width of the ottoman base at a depth of approximately 25cm. There are no internal divisions or runners reducing the usable space. The entire floor area of the bed is accessible storage, suited to duvets, pillows, suitcases, seasonal clothing, and bulky items that need a home in the bedroom. The storage capacity scales with bed size: a super king Harriet has a significantly larger interior compartment than a double.

Q: Can I choose any fabric for the Harriet?

A: Yes. The Harriet is available in over 25 colours and textures across Plush Velvet, Naples, Boucle, Linoso, and Marble. The headboard and base are upholstered in the same fabric throughout. Fabric samples are available on request and are recommended before ordering, particularly for Plush Velvet where the colour reads differently in different light conditions and the pile direction affects the overall tone of the headboard surface.

Q: Does the Harriet come with a mattress?

A: No. The Harriet is sold as bed frame and ottoman base only. A solid wood slat base is included as standard. The slats are compatible with all standard UK mattress types including pocket sprung, memory foam, and hybrid. Mattresses are available separately in the Macba Beds range.

Q: How long does assembly take?

A: Most customers complete the full build in under ninety minutes. The gas-lift mechanism is pre-installed in the base, so no on-site mechanical assembly is required for the storage function. All fixings and an Allen key are included. The Macba Beds team is available by phone or email if assistance is needed at any point.

Q: What is the 100-day free trial?

A: Every Harriet Panels Ottoman Bed comes with a 100-day free trial from the date of delivery. Over three months to sleep on it and live with it in your home before making your final decision. If it is not right within that period, contact the Macba Beds team and they will guide you through the next steps.

Q: What does the 5-year warranty cover?

A: The 5-year warranty covers the frame, headboard, and gas-lift mechanism against manufacturing defects. If the gas-lift mechanism fails or performs incorrectly, or if the frame or headboard develops a fault in materials or workmanship within five years, Macba Beds will repair or replace it. Contact the team with your order number to make a claim.

Q: Is delivery really free?

A: Yes. Free tracked delivery is included on every Harriet order to mainland UK addresses with no minimum spend and no charges at checkout. You will receive a tracking link by email once dispatched. For remote postcodes including the Scottish Highlands and Northern Ireland, contact the team before ordering to confirm lead times for your area.